When unboxing a Da Geng bead, don't rush to cut the string right away. Many people's first instinct after getting a new bead is to cut the string and replace it with their own, but this is actually too hasty. There are a few things you need to do first after unboxing. If you do them correctly, it will make it much easier to polish the bead later.

Check It First, Then Start Working

Check it first, then start working. After getting the bead, check each seed individually. Make sure the holes are straight, there are no chipped edges, the seeds aren't cracked, and the seed shapes are consistent. If you find any problems early on, contact the seller to handle them. If you cut the string and then find problems, it will be a hassle to return or exchange it.

Dry It in the Shade First, Then Apply a Base Coat

Dry it in the shade first, then apply a base coat. New beads may have absorbed moisture during transportation, so first place them in a well-ventilated area to dry for two days to stabilize the seeds before starting to polish them. If you start polishing them right away, the alkali residue may recur, resulting in a poor effect.

Record It First, Then Start Polishing

Record it first, then start polishing. After unboxing, take a few photos and record the initial state, including the skin color, size, and patterns, so you'll have a reference for comparing changes later. When unboxing a Da Geng bead, don't rush to cut the string right away. Instead, complete the three steps of checking, drying in the shade, and recording before starting your polishing journey.

The ritual of unboxing is to let you get to know the bead well and take it seriously from the first step. If you do the checking, drying in the shade, and recording well, polishing the bead will go smoothly, and the bead will truly belong to you.