How to clean pulp from the crevices of an Old Tree King 108-bead mala. With 108 beads, cleaning pulp from the crevices is a delicate task, and the question is how to do it. Explain clearly how to clean pulp from the crevices of an Old Tree King 108-bead mala.

Cleaning tools
Cleaning tools: For pulp in the crevices of a 108-bead mala, use a stiff-bristled brush plus a needle; brush first to loosen the pulp in the crevices; then pick with the needle to remove the pulp. With the tools ready, cleaning is no rush.
Cleaning method
Cleaning method: With 108 beads, clean them one by one—don't cut corners; brush first, then pick, going through each bead; after cleaning, give the whole mala a final brush for a neat finish. Cleaning requires patience.
Cleaning precautions
Cleaning precautions: Don't get the mala wet while cleaning—a 108-bead mala is prone to cracking when wet; pick the pulp with light force to avoid damaging the beads; after cleaning, let it air dry before handling it for breaking-in. How to clean pulp from the crevices of an Old Tree King 108-bead mala: brush with a stiff brush to loosen, pick out with a needle, clean one by one without water, air dry after cleaning, then break in—the 108 beads will be clean.
With 108 beads, cleaning requires patience—go through each one, avoid water and sharp tools, and the cleaned mala will be neat and tidy.
With 108 beads, cleaning is fine work—brush each one loose and pick it clean, avoid water and don't pry hard, air dry after cleaning before breaking in, and the crevices of the mala will be spotless.
Cleaning the crevices of a 108-bead mala is delicate work—do it one bead at a time, brush loose and pick clean without water, air dry after cleaning, and with clean crevices, the mala will feel smooth during breaking-in.
