What's the first step to take when you just got your hands on an old Lao Shu Wang necklace? String it up and feel happy, but don't rush to start polishing it. Getting the first step right means you're off to a good start. The first step is crucial when you just got your hands on an old Lao Shu Wang necklace.

Step 1: Inspection

The first step is to inspect it. Check each seed on the necklace to see if there are cracks, broken teeth, or repairs. Contact the seller immediately if there are any issues. Check the color of the leather to see if it matches the pictures. Also, check the stringing to ensure it's neither too loose nor too tight. Passing this inspection means the necklace is in good condition, so you can proceed to the next step. Don't skip this crucial first step.

Step 2: Air-drying

The second step is to air-dry the necklace. New necklaces may have moisture on the surface, so place them in a well-ventilated area to air-dry for two to three days to stabilize the seeds. During this period, don't start polishing it or expose it to direct sunlight. Let the necklace dry naturally. Air-drying is a crucial preparation step before polishing. Once the necklace is stable, polishing will go smoothly. Don't skip this step. After two to three days of air-drying, the necklace will be ready.

Step 3: Polishing

The third step is to start polishing. Use a hard brush to clean the grooves and a soft brush to polish it. Polish it for one to two hours every day for one to two months. Once the alkali is removed and the grooves are cleaned, the base layer will be transparent. What's the first step to take when you just got your hands on an old Lao Shu Wang necklace? Inspection, air-drying, and polishing—these three steps will lay a solid foundation for the necklace. After that, you can start polishing it, and the necklace will reward you with its beauty.