Seed replenishment and stringing
This Rudraksha was recently selected for a client. A friend's Rudraksha lost a few beads. The client had looked at several strands in livestreams before, but either the prices were inflated or the bead quality was average. Through a friend's introduction, they found me and asked me to help pick a strand they would be happy with.
I first confirmed the requirements with the client: 20mm size, short barrel shape with full flesh, budget around two thousand, mainly for wearing, occasionally breaking-in (patina process). Once the requirements were clear, I started sourcing beads and contacted several suppliers I regularly buy from. I looked at three batches of beads in total.
Helping a friend replace Rudraksha beads and restring
The bead selection process is actually quite grueling. Step one: filter by size, keeping only those between 19.8 and 20.2mm. Step two: check density and skin color—discard any that feel light, or have dark spots or mottled patches. Step three: check the barrel shape—short barrel means height under 18mm. Step four: check the grain—full flesh needs to be plump, and each bead's style should be similar.
It took three days of sorting through over two hundred beads to select fourteen—twelve for the main mala and two as spares. These fourteen beads all had very consistent size, barrel shape, grain, and color. They felt heavy in the hand, with excellent density.
Once the beads were selected, I started drilling and stringing. I used a 1.5mm drill bit at slow speed, drilling one by one carefully to avoid cracking. When stringing, each bead was oriented the same way—front facing outward, dragon-ridge (ridge line) direction aligned—so it looks neat when rotated. After stringing, I did a test fit. The client's wrist is 17.5cm, and twelve 20mm beads plus the Buddha head fit perfectly.
Finished Result and Client Feedback
After stringing, I delivered it to the client. He examined it from every angle and was very satisfied. He said the ones he'd seen in livestreams either had inconsistent sizes or uneven grain depth, and were more expensive on top of that. My mala was carefully selected, every bead consistent, far better than what he saw in livestreams.
That's really what it's like helping clients pick a mala—it takes time and strains the eyes, but when the client wears the finished mala comfortably and looks happy, it's worth it. With collectibles like this, it's all about dedication. Put your heart into it, and it will reward you.
Closing remarks
If anyone wants to pick out a Rudraksha mala, I'd suggest being patient and not rushing. Compare more, look more, and the beads you pick won't be bad. With collectibles like this, it's all about the process—you can't rush it.
Hope everyone can pick out their ideal mala (prayer beads) and enjoy the breaking-in (patina process).
